[1]    M. K. MASTEN, "Inertially stabilized platforms for optical imaging systems," in IEEE Control Systems Magazine, vol. 28, no. 1, pp. 47-64, Feb. 2008. 
[2]    Havangi, R. and S.H. Khatami, Simultaneous identification and tracking of objects using deep learning. Journal of Machine Vision and Image Processing, 2023. 10(3): p. 79-92
[3]    Sasaki, Takahiro, et al. “Robust Attitude Control Using a Double-Gimbal Variable-Speed Control Moment Gyroscope.” Journal of Spacecraft and Rockets, vol. 55, no. 5, Sept. 2018, pp. 1235–47. 
[4]    Jayachitra, A., and R. Vinodha. “Genetic Algorithm Based PID Controller Tuning Approach for Continuous Stirred Tank Reactor.” Advances in Artificial Intelligence, vol. 2014, Dec. 2014, pp. 1–8.
[5]    Ravindra, S., 2008: “Modeling and Simulation of the Dynamics of a Large Size Stabilized Gimbal Platform Assembly”. Asian International Journal of Science and Technology in Production and Manufacturing, Vol. 1, pp. 111-119.
[6]    Rue, A. K., 1974: “precision stabilization systems”. IEEE Trans. Aerospace and Electronic Systems. AES-10, pp. 34-42. 
[7]    Ekstrand, B., 2001: “Equation of Motion for a Two Axes Gimbal System”. IEEE Trans. On Aerospace and Electronic Systems, Vol. 37, pp. 1083-1091.
[8]    Daniel, R., 2008: “Mass properties factors in achieving stable imagery from a gimbal mounted camera”. Published in SPIE Airborne Intelligence, Surveillance, Reconnaissance (ISR) Systems and Applications V. 6946.
[9]    Özgür, H., Aydan, E., and İsmet E., 2011: “Proxy-Based Sliding Mode Stabilization of a Two-Axis Gimbaled Platform”. Proceedings of the World Congress on Engineering and Computer Science, San Francisco, USA (WCECS), I.
[10]    Ravindra, S., 2008: “Modeling and Simulation of the Dynamics of a Large Size Stabilized Gimbal Platform Assembly”. Asian International Journal of Science and Technology in Production and Manufacturing, Vol. 1, pp. 111-119.
[11]    Khodadadi, H., 2011: “Robust control and modeling a 2-DOF Inertial Stabilized Platform”. International Conference on Electrical, Control and Computer Engineering, Pahang, Malaysia.
[12]    Smith, B. J., Schrenck, W. J., Gass, W. B, and Shtessel, Y. B., 1999: “Sliding mode control in a twoaxis gimbal system”. in Proc. IEEE Aerospace Applicat. Conf, Vol. 5, pp. 457–470.
[13]    Willian, B., and Steven, P. T., 1989: “Optimal motion stabilization control of an electrooptical sight system”. Proc. SPIE Conference, Vol. 1111, pp. 116–120.
[14]    Hullender, L. Bo, and DeRenzo, D., M., 1998: “Nonlinear induced disturbance rejection in inertial stabilization systems”. IEEE Trans, Vol. 6, pp. 421–427.
[15]    Abdo, Maher Vali, Ahmad Toloei, Alireza. (2013). Fuzzy Stabilization Loop of One Axis Gimbal System. International Journal of Computer Applications. 77. 6-13. 10. 5120/13372-0975.
[16]    Maher Mahmoud Abdo, Ahmad Reza Vali, Ali Reza Toloei, Mohammad Reza Arvan. (2014). Stabilization loop of a two axes gimbal system using self-tuning PID type fuzzy controller. ISA Transactions, Volume 53, Issue 2, Pages 591-602.
[17]    S. M. G. Kumar, R. Jain, N. Anantharaman, V. Dharmalingam, and K. M. M. S. Begam, “Genetic algorithm based PID controller tuning for a model bioreactor,” Indian Institute of Chemical Engineers, vol. 50, no. 3, pp. 214–226, 2008.
[18]    I. Chiha, N. Liouane, and P. Borne, “Tuning PID controller using multiobjective ant colony optimization,” Applied Computational Intelligence and Soft Computing, vol. 2012, Article ID 536326, 7 pages, 2012.
[19]    V. Rajinikanth and K. Latha, “Bacterial foraging optimization algorithm based pid controller tuning for time delayedunstable systems,” Mediterranean Journal of Measurement and Control, vol. 7, no. 1, pp. 197–203, 2011.
[20]    M. Zamani, M. Karimi-Ghartemani, N. Sadati, and M. Parniani, “Design of a fractional order PID controller for an AVR using particle swarm optimization,” Control Engineering Practice, vol. 17, no. 12, pp. 1380–1387, 2009. 
[21]    V. Rajinikanth and K. Latha, “Identification and control of unstable biochemical reactor,” International Journal of Chemical Engineering Applications, vol. 1, no. 1, pp. 106–111, 2010. 
[22]    Jayachitra, A., and R. Vinodha. “Genetic Algorithm Based PID Controller Tuning Approach for Continuous Stirred Tank Reactor.” Advances in Artificial Intelligence, vol. 2014, Dec. 2014, pp. 1–8.
[23]    Latha, K. & Rajinikanth, Venkatesan & Surekha, P.. (2013). PSO-Based PID Controller Design for a Class of Stable and Unstable Systems. ISRN Artificial Intelligence. 2013. 10.1155/2013/543607.
[24]    Lee, T.H. & Huang, Sunan & Tang, K.Z. & Tan, K.K. & Al-Mamun, Abdullah. (2003). PID control incorporating RBF-neural network for servo mechanical systems. Comptes Rendus Mathematique - C R MATH. 2789 - 2793 Vol.3. 10.1109/IECON.2003.1280689.
[25]    Fujita, H., and Sasaki, J., 2010: “Torque Control for DC Servo Motor using Adaptive Load Torque Compensation”. Proceedings of the 9thWSEAS international conference on System science and simulation in engineering, pp. 454-458.
[26]    Lee, H. -P. and Yoo, I. -E., "Robust control design for a two-axis gimbaled stabilization system", in Aerospace Conference, IEEE. (2008), 1-7.
[27]    Kurukowa, H., A Geometric Study of Control Moment Gyroscopes, PhD Thesis, University of Tokyo, 1998.
[28]    Yucelen, T., Kaymakci, O., Kurtulan, S. (2006). Self-Tuning PID Controller Using Ziegler-Nichols Method for Programmable Logic Controllers. IFAC Proceedings Volumes, 39, 11-16.
[29]    Koohi and V. Z. Groza, "Optimizing Particle Swarm Optimization algorithm," 2014 IEEE 27th Canadian Conference on Electrical and Computer Engineering (CCECE), Toronto, ON, 2014, pp. 1-5, doi: 10. 1109/CCECE. 2014. 6901057.
[30]    Vincent, A. K. and Nersisson, R., “Particle swarm optimization based PID controller tuning for level control of two tank system”, in Materials Science and Engineering Conference Series, 2017, vol. 263, no. 5, p. 52001.